Slikajel Makinası | Kesim Masası | Yıkama Makinaları | Extruder makinaları
Extruder For Hot Melt Blocks 50LT
Adjustment and digital display of the working temperature from 160° c up to 200° c. Adjustment of the extrusion capacity from zero up to 0.1-1.2 kg/min by means of a safety valve. Die cast aluminum construction tank. Bronze-made pump for higher resistance to overpressure. All resistances are stainless steel-made and are not directly in contact with the material to be extruded. Automatic locking of the pump in case of anomalies in the heating plant.
- Adjustment and digital display of the working temperature from 160° c up to 200° c.
- Adjustment of the extrusion capacity from zero up to 0.1-1.2 kg/min by means of a safety valve.
- Die cast aluminum construction tank.
- Bronze-made pump for higher resistance to overpressure.
- All resistances are stainless steel-made and are not directly in contact with the material to be extruded.
- Automatic locking of the pump in case of anomalies in the heating plant.
- Double control of the heating system to avoid start-up below working temperature.
- Protection against over-pressure of the exit hose by means of the capacity adjustment safety valve.
- Safety protections against access to the dangerous parts of the machine according to the European norms.
- Thermic protection of the motor, of the resistance and of the low voltage circuit.
| Technical Data |
| VOLTAGE |
400 Vac 3 PHASE + NEUTRAL 50 Hz |
| TOTAL ABSORBED POWER |
7,5 Kw 400 Vac 50 Hz |
| PUMP MOTOR |
2,2 Kw 400 Vac 3 PHASE 50 Hz |
| HOT MELT TANK CAPACITY |
MAX 50 LT |
| TANK INTERNAL DIAMETER |
250 mm |
| EXTRUSION CAPACITY |
FROM ZERO UP TO 0.1-1.2 KG/MIN |
| HEIGHT |
1200 mm |
| LENGTH |
600 mm |
| WIDTH |
900 mm |
| WEIGHT |
150 Kg |
Slikajel Makinası | Kesim Masası | Yıkama Makinaları | Extruder makinaları